1. 

   AG-5603 Silver Ion Photometer Reagent Kit
   Simple and easy to use cost effective reagents, each pack will perform 100 silver ion tests.
   

2. 

   Aluminium Photometer Test Strips and Buffer
   The eXact® Micro Aluminum Test Strip Total comes in a bottle of 50 test strips with reagent, the strips contain an exact amount of reagent to test safely, accurately and quickly without the need to crush tablets. used in the eXact®20 Photometer and with Octo Marines MLC-2006 potable water compliance test kits
   

3. 

   Ammonia Photometer Test Strips and Buffer
   The eXact Micro Ammonia Test Strip comes in a bottle of 50 test strips with reagent, the strips contain an exact amount of reagent to test safely, accurately and quickly without the need to crush tablets. used in the eXact®20 Photometer and with Octo Marines MLC-2006 potable water analysis compliance test kits
   

4. 

   Calcium Photometer Test Strips
   The eXact® Micro Test Strip Calcium Hardness comes in a bottle with 50 test strips, these strips contain an exact amount of reagent to test safely, accurately and quickly without the need to count drops or crush tablets. used in the 525nm eXact® Photometers, including the eXact®20, eXact® Eco-Check, eXact® Micro 10 and eXact® Micro 7+. Used in the Octo Marin MLC-2006 potable water compliant test kits
   

5. 

   Chlorine Dioxide Photometer Test Strips
   The eXact® Micro Test Strip Chlorine Dioxide comes in a bottle with 100 test strips, these strips contain an exact amount of reagent to test safely, accurately and quickly without the need to count drops or crush tablets. used in the 525nm eXact® Photometers, including the eXact®20, eXact® Eco-Check, eXact® Micro 10 and eXact® Micro 7+. Used with the Octo Marine MLC-2006 potable water test compliant test kits
   

6. 

   Coliform and E-Coli presence/ absence analysis
   This product is a very accurate presence / absence test for both total coliforms and e-coli, which simultaneously detects total coliforms and E. coli in water. It is based on patented Defined Substrate Technology* (DST*). When total coliforms metabolize the products nutrient-indicator, ONPG, the sample turns yellow. When E. coli metabolize it's other nutrient-indicator, MUG, the sample also fluoresces. This florescence can be seen using a 365nm uv lamp. used with Octo Marines MLC-2006 potable water compliance test kits Proven U.S. EPA-approved, 24-hour test for drinking and source waters. International approvals include AOAC, IBWA and EBWA. Millions of tests performed worldwide every year. Easy Ease of use simplifies training. Unit-dosed packaging eliminates media preparation. No repeat testing due to clogged filters or heterotrophic interference. Quality Control (QC) procedure can be done in 15 minutes. Rapid Less than 1 minute of hands-on time. Detects coliforms and E. coli simultaneously in 24 hours or less. No confirmations needed. No glassware cleaning or colony counting. Accurate Identifies E. coli specifically, eliminating unnecessary public notification due to non-target organisms. Suppresses up to 2 million heterotrophs per 100 mL and 5 million per 250 mL. Eliminates the subjective interpretation found in traditional methods. Detects a single viable coliform or E. coli per sample.
   

7. 

   Copper CU2+ Photometer Test Strips
   The Octo Micro Test Strip Copper test comes in a bottle with 50 test strips, these strips contain an exact amount of reagent to test safely, accurately and quickly without the need to count drops or crush tablets. used in the 525nm eXact® Photometers, including the eXact®20, eXact® Eco-Check, eXact® Micro 10 and eXact® Micro 7+. Used with the Octo Marine MLC-2006 potable water test compliance kits
   

8. 

   Enterococci presence/ absence analysis
   This product is a very accurate presence / absence test for Enterococci which uses a Defined Substrate Technology® (DST®) nutrient-indicator to detect enterococci. This nutrient-indicator fluoresces when metabolized by enterococci. DST improves accuracy and avoids the need for hazardous sodium azide suppressants used in traditional media. Used with the Octo Marine MLC-2006 potable water test compliance kits Easy No media preparation. No autoclaving. No colony counting. No glassware cleaning. Rapid Less than 1 minute of hands-on time. Results in 24 hours rather than 48 to 72 hours. requires the use of a 365nm UV lamp Accurate Sensitive to 1 enterococci/100 mL Less subjective interpretation. 50% fewer false positives and 95% fewer false negatives than the standard membrane filtration (MF) method.1 Economical Up to 12-month shelf life minimizes waste. 24-hour test saves incubator space.
   

9. 

   Free Chlorine Photometer Test Strips
   The eXact® Micro Test Strip Free Chlorine comes in a bottle with 100 test strips these strips contain an exact amount of reagent to test safely, accurately and quickly without the need to count drops or crush tablets. used in the 525nm eXact® Photometers, including the eXact®20, eXact® Eco-Check, eXact® Micro 10, eXact® Chlorine+ and eXact® Micro 7+. Used with the Octo Marine MLC-2006 potable water test compliance kits
   

10. 

    High Range Chlorine Photometer Test Strips
    The eXact® Micro Test Strip High Range Chlorine test kit is specifically designed for use during the vessels manditory Hypo-Chlorination process it comes in a bottle with 100 test strips these strips contain an exact amount of reagent to test safely, accurately and quickly without the need to count drops or crush tablets.
    

11. 

    Iron, Total, Ferric and Ferris Iron Photometer Test Strips (FE2+ & FE3+
    The eXact® Micro Test Strip Total Iron TPTZ comes in a kit with 50 strips and 50 reducer pillows, this kit can be used to measure Ferrous (Fe2+), Ferric (Fe3+) and total Iron, the strips contain an exact amount of reagent to test safely, accurately and quickly without the need to count drops or crush tablets. used with the eXact®20, eXact® Micro7+ and eXact® Micro8. Used with the Octo Marine MLC-2006 potable water analysis compliance kits
    

12. 

    Legionella Analysis (MLC-2006 potable water analysis compliant)
    Legionella Analysis The test kit contains everything required to perform a legionella analysis, including sample collection containers and disposable pipettes. These tests are optimised for use with hot and cold water systems, whirlpool spas, showers, cooling towers and industrial water systems. The test is simple to use and fast, with no interpretation required. Results are easy to read and obtained within 25 minutes. There are no chemicals to measure or handle. The test allows immediate understanding and response to the water conditions. Use can reduce risk of outbreaks and litigation. Test volume 100µL 100 µL Exact volume disposable pipette provided Sample parameters pH range 5-10 Sample temperature range 15-45°C (59-113 F) Environmental operating range 15-40ºC (59-104 F) Free chlorine concentration < 5ppm Total Alkanlinity <1000 ppm Total Hardness <1000 ppm Biocides The product has been tested with a range of common biocides and biodispersants used in Legionella control, at their normal maximum operating concentration. Active ingredients tested include: glutaraldehyde, didecyl-dimethyl-ammonium chloride, isolthazoles, dibromonitrilopropionamide, ionic and non-ionic surfactants. The test gives a false positive if used with polymeric biguanide or THPS. Operator time <2 minutes Development time 25 minutes Shelf life 18 months from manufacture when stored at room temperature (<30°C) in original packaging
    

13. 

    Nitrate Photometer Test Strips
    The eXact® Micro Test Strip Nitrate comes in a bottle with 50 test strips, these strips contain an exact amount of reagent to test safely, accurately and quickly without the need to count drops or crush tablets. used in the 525nm eXact® Photometers, including the eXact®20, eXact® Eco-Check. Used with the Octo Marine MLC-2006 potable water test compliance kit
    

14. 

    Pseudomonas aeruginosa presence/ absence analysis
    This product is a very accurate presence / absence test for P. aeruginosa. It detects or quantifies P. aeruginosa in drinking water, pool, spa, and carbonated or non-carbonated bottled water in a 100 mL format. Use this test to detect P. aeruginosa quickly to safeguard against illness in sensitive populations. Detects P. aeruginosa in 24 hours. Delivers definitive results with no additional confirmation steps. Minimizes the risk of false positives from non-target organisms. Used in the Octo Marine MLC-2006 potable water analysis compliant test kit. Easy Fluorescence of vessel indicates a positive result. Ready-to-use reagents, no media preparation. Convenient unit-dosed packaging. No toxic compounds. Rapid Definitive results in 24 hours. Less than 1-minute of hands-on time for streamlined testing work flow. Accurate Specifically detects Pseudomonas aeruginosa, reducing the risk of false positives from non-target organisms. Results are definitive without additional confirmation steps. Simple fluorescent colour change minimizes subjective result interpretation. 365nm UV lamp required
    

15. 

    Simplate Heterotrophic Plate Count (HPC) analysis
    SimPlate for HPC method is used for the quantification of heterotrophic plate counts (HPC) in water. It is based on patented Multiple Enzyme Technology, which detects viable bacteria in water by testing for the presence of key enzymes known to be present in these organisms. It uses multiple enzyme substrates that produce a blue fluorescence when metabolized by waterborne bacteria. The sample and media are added to a SimPlate, incubated, and then examined for fluorescing wells. The number of fluorescing wells corresponds to a Most Probable Number (MPN) of total bacteria in the original sample. Used in the Octo Marine MLC-2006 potable water compliant analysis kit The MPN values generated by the SimPlate for HPC method correlate with the Pour Plate method using Total Plate Count Agar incubated at 35°C for 48 hours as described in Standard Methods for the Examination of Water. Easier to read and use than the pour-plate method. No agar preparation. 738/plate Most Probable Number (MPN) counting range minimizes need for dilutions. Rapid Instant media preparation. Less than 2 minutes of hands-on time. Reduced read time. Accurate Correlates with U.S. EPA-approved pour-plate method1 using plate count agar and 48-hour, 35°C incubation. Simplified procedure minimizes chance of contamination. Less subjective interpretation than pour plate. Economical Less equipment to purchase and maintain. Increased productivity saves labour costs. Minimal Quality Control (QC).
    

16. 

    Total Alkalinity Photometer Test strips
    The eXact® Micro Alkalinity Test Strip Total comes in a bottle with 100 test strips, these strips contain an exact amount of reagent to test safely, accurately and quickly without the need to count drops or crush tablets. used in the 525nm eXact® Photometers, including the eXact®20, eXact® Eco-Check, eXact® Micro 10 and eXact® Micro 7+. Used with the Octo Marine MLC-2006 potable water compliant analysis test kits
    

17. 

    Total Hardness Photometer Test Strips
    The eXact® Micro Test Strip Total Hardness comes in a bottle with 50 test strips, these strips contain an exact amount of reagent to test safely, accurately and quickly without the need to count drops or crush tablets. used with the eXact®20. Used in the Octo Marine MLC-2006 potable water compliant analysis test kits
    

17 Results returned.

AllEquipmentLegionellaMLC-2006 CompliantReagentsSilver Ion